The RSIC-CWB™ has been used for several different acoustic needs. The most common use for this clip is to decouple two framed walls from each other. Some of the other uses are separating Brick or CMU walls from a framed wall to help ensure the two walls are isolated from each other. This is done by installing the RSIC-CWB™ into the mortar joints while the Brick or CMU wall is under construction.
The RSIC-CWB HD/DD™ has been used for several different acoustic needs. The most common use for this clip is to decouple two framed walls from each other. Some of the other uses are separating Brick or CMU walls from a framed wall to help ensure the two walls are isolated from each other. This is done by installing the RSIC-CWB™ into the mortar joints while the Brick or CMU wall is under construction.
Chase Wall Brace Heavy Duty Double Deflection-Deflection Control
The RSIC-CWB™ is used for several different acoustic needs. The most common use is to decouple or separate two parallel framed walls such as chase walls. The RSIC-CWB™ is available in two different load capacities the RSIC-CWB™ has an Acoustical Design Load of 36 pounds for each isolator and the allowable sustained pull load is 240 pounds. While the RSIC-CWB-HD/DD-DC™ (Heavy Duty/Double Deflection) has an Acoustical Design Load of 144 pounds per each isolator and the allowable sustained pull load is 480 pounds. The RSIC-CWB-HD/DD-DC™ with Defection Control also has an Acoustical Design Load of 144 pound plus the added benefit of a built-in Deflection Control which limits the amount of total deflection allowed. Deflection Control is important in applications where seismic activity may occur. Please Note: These product are developed for "noise control" therefore the "Acoustical Design Load" should not be exceeded. The allowable pull loads include a 500% safety margin between ultimate and allowable loads.
RSIC-CWB™ the Low Cost, High Performance, Noise Control Solution.
